XtraBond HT High-Temp Silicone Sealant 10.1 oz - Red

XtraBond HT High-Temp Silicone Sealant 10.1 Fl Oz. tube

XtraBond®HT is a one part, easy to use, non-slumping paste that cures to a silicone rubber when exposed to atmospheric moisture at room temperature. This product is engineered to provide a durable, watertight bond when exposed to continuous temperatures ranging from -40° to 500°F on a continuous basis – while maintaining its integrity at up to 600°F for intermittent time periods. Its unique formulation acts as both a thermal and electrical insulator as well, so it is ideal for sealing around heating elements.  

• Aggressive Adhesion to Common Construction Substrates
• Compatible with SBS Flashing
• Low VOCs

XtraBond HT is a one part, easy to use, non-slumping paste that cures to a silicone rubber when exposed to atmospheric moisture at room temperature. This product is engineered to provide a durable, watertight bond when exposed to continuous temperatures ranging from -80° to 500°F on a continuous basis - while maintaining its integrity at up to 600°F for intermittent time periods. Its unique formulation act as both a thermal and electrical insulator as well, so it is ideal for sealing around heating elements.

• Red color
• Approved in high temperature areas
• Non-sag
• Insulates electricity
• up to 600° F
• Insulates thermally

Industries Served

This product is designed, engineered and manufactured for the following industries:

• Residential Construction
• Commercial Construction
• Remodel Construction
• Truck & Trailer
• Flooring

Specifications

XtraBondHT meets or exceeds the requirements of:

• ASTM C920 Type S, Grade NS, Class 25, Use NT, G, M.
• Federal Specification TT-S-00230C Type II, Class A.
• NSF/ANSI 51 – Food Equipment Materials

Surface Preparations

The substrate must be clean, dry, frost free,sound, and free of any oils, grease or incompatible sealers, paints or
coatings that may interfere with adhesion. Do not apply if surface is damp or contaminated. It is recommended all substrates are tested prior to application.

Directions

For best results, prepare clean surface. Cut nozzle to desired bead size. Apply with caulking gun, forcing sealant onto the substrate, then tool if needed. Clean excess material with mineral spirits or similar solvent.

Storage

Material is to be stored under controlled dry environment (below 75° F). Use within 18 months from date of manufacture. For best results, keep material in tightly closed containers when not in use. Do not freeze.

See Downloadable PDF for more detailed specifications